The antenna AD-10/S is a wideband vertical polarised dipole covering the frequency range from 108 to 2000 MHz. All elements of the antenna are enclosed in an epoxy - glass composite tube. The antenna is intended for stationary use. Electrically the antenna is designed so that enables a large bandwith and relatively constant vertical radiation diagram. The antenna has built-in a coaxial cable length of 1 m with coaxial connector N female type at the end. A special mounting tube with mounting console adapter enables to mount the antenna on the mast with diam. up to 60 mm (2”).
Antenna model AD-10/S-HP has the same specifications and it is designed for High RF Power Power applications.
Versions
AD-10/S Rev. A
BS dipole, 108 - 2000 MHz, RF power 750W@108MHz ... 150W@2GHz
AD-10/S-HP
BS dipole, 108 - 2000 MHz, RF power 2000W@108MHz ... 600W@2GHz
Technical specification
| AD-10/S Rev. A | AD-10/S-HP | |
| Frequency range | 108 - 2000 MHz | |
| Impedance | 50 ohm | |
| VSWR |
< 2.5 (108 - 500 MHz) < 3 (500 - 2000 MHz) |
|
| Gain | -2 ... +2 dBi | |
| Ver. radiation pattern | See PDF data sheet | |
| Polarization | VER. | |
| Max. power | 750 W @ 108 MHz 150W @ 2 GHz |
2000 W @ 108 MHz 600W @ 2 GHz |
| Height | 1100 mm | |
| Diameter | 130 mm | |
| Mass of antenna | 7.8 kg | |
| Wind velocity | 160 km/h | |
| Temp. range | -50...+80 °C |
