AD-26/CW: wideband sectionalized whip VHF antenna for manpack radios, 30 - 108 MHz; Rev. A

The manpack VHF antenna AD-26/CW is a  wideband VHF monopole antenna intended for use primarily on manpack radios. The antenna radiator is composed of 8 sections made of thin wall copper plates stainless steel with tubular joints and elastic rope enabling fast deployment. The antenna has built-in a special passive transformer tuning network enclosed in fiberglass housing above the input coaxial connector. Above the transformer unit is so called “goose neck” enables that the antenna is always in vertical position. 
The antenna is wideband and therefore suitable for use with standard VHF radios as well with “frequency hopping” systems for work in stay with radio on the ground or on the back, concerning the antenna length. All metal parts of the antenna are galvanically protected. Antenna radiator is painted MIL Green (RAL 6014) while the goose-neck and matching unit are black.
Different models regarding the frequency range, max. RF power, input connector, etc., are available on request. The AD-26/CW is considered also a military jamming antenna.

Versions

AD-26/CW
antenna with goose-neck and custom BNC/TNC connector with outer thread M24x1.25
AD-26/CW-S
antenna with goose-neck and SINCGARS connector
AD-26/CW-N
antenna with goose-neck and N male connector
AD-26/CW-TNC
antenna with goose-neck and TNC male connector

Technical specification

Frequency range 30 - 108 MHz 
Impedance 50 ohm
VSWR < 3.5
Gain see PDF
Max power 50 W CW 
Polarization VER. 
Connector mod. BNC/TNC
Height 2.45 m
Weight 510 g
Lenght of sections 300 mm
Environmental specifications MIL-STD-810F

Contact us

 

TRIVAL ANTENE d.o.o., Gorenjska cesta 25, 1234 Menges, SLOVENIA, EU
TEL: +386-1-8314-396, FAX: +386-1-8313-377, EMAIL: info@trivalantene.si

More contacts